🎉 Up to 70% Off Selected ItemsShop Sale
\n

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.
\n

Plate file

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • \nFriendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.\n

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Firmware

PCB

\n

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

\n
\n
\n

ANSI Plate

\n
\n

ANSI PC plate

\n
\n

ANSI Alu plate

\n
\n

ANSI Carbon Fiber plate

\n
\n
\n

layout Support

Pictures

\n
\n

Dimension

\n
\n
\n

Holy 80 Hotswap PCB kit

 

\n
\n
\n

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.
\n

Plate file

Firmware

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • \nFriendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.\n

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Video

PCB

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

\n
\n

ANSI Plate

\n
\n

ANSI PC plate

\n
\n

ANSI Alu plate

\n
\n

ANSI Carbon Fiber plate

\n
\n
\n

layout Support

Pictures

\n
\n

Dimension

","image":["/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-7.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-8.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-9.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-10.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-11.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-12.jpg","/images/kbdfanshq.shop/images/product/holy80-kit-with-hotswap-pcb-7.jpg","/images/kbdfanshq.shop/images/product/holy80-kit-with-hotswap-pcb-8.jpg","/images/kbdfanshq.shop/images/product/holy80-kit-with-hotswap-pcb-9.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-13.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-14.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-15.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-17.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-18.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-19.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-20.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-21.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-22.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-23.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-24.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-25.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-26.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-27.jpg","/images/kbdfanshq.shop/images/product/ready-to-use-holy80-hotswap-version-with-lucy-r2-keycaps-28.jpg"],"sku":"holy80-kit-with-hotswap-pcb","brand":{"@type":"Brand","name":"KBDfans Mechanical Keyboards Store"},"offers":{"@type":"AggregateOffer","lowPrice":64.5,"highPrice":66,"priceCurrency":"USD","availability":"https://schema.org/InStock","url":"https://kbdfanshq.shop/products/holy80-kit-with-hotswap-pcb","offerCount":24}}
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15
Product image 16
Product image 17
Product image 18
Product image 19
Product image 20
Product image 21
Product image 22
Product image 23
Product image 24
HomeStore

Holy80 Kit with hotswap PCB

Holy80 Kit with hotswap PCB

Holy 80 Hotswap PCB kit

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.

Plate file

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • Friendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Firmware

PCB

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

ANSI Plate

ANSI PC plate

ANSI Alu plate

ANSI Carbon Fiber plate

layout Support

Pictures

Dimension

Holy 80 Hotswap PCB kit

 

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.

Plate file

Firmware

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • Friendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Video

PCB

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

ANSI Plate

ANSI PC plate

ANSI Alu plate

ANSI Carbon Fiber plate

layout Support

Pictures

Dimension

Select Plate material
Select Case color
From $64.50

Original: $215.00

-70%
Holy80 Kit with hotswap PCB—

$215.00

$64.50

Product Information

Shipping & Returns

Description

Holy 80 Hotswap PCB kit

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.

Plate file

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • Friendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Firmware

PCB

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

ANSI Plate

ANSI PC plate

ANSI Alu plate

ANSI Carbon Fiber plate

layout Support

Pictures

Dimension

Holy 80 Hotswap PCB kit

 

Include

  • JST cable x1
  • Aluminum top and bottom case x1
  • Rubber feet x1 set
  • Screwdriver with T8 bit x1
  • PH0 Phillips screwdriver bit x1
  • Silicone Bumpers x 1 set
  • Screws x1 set
  • Screw standoff x1 set
  • Carrying case x1
  • Dual Silicone diffuser
  • Hotswap PCB x1
  • USB Cable x1
  • Cherry stabilizers x1 set
  • PCB foam x1
  • Optional plate x1

Halo Bottom cover

  • material: PC
  • Process: CNC
  • Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
  • Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
  • Estimated to ship before September 10, 2025.

Plate file

Firmware

About Tape Mod information

  • Cut your image online
  • Image must have at least 2073 px width and 749 px height
  • Friendly Reminder: There are cut-off points on the customized tape mod.
    -Cut-off points for top and bottom is 2 mm
    -Cut-off points for left and right is 4 mm
    Make sure the picture you select will not be affected by the cut-off points.

  • If you upload the image, you agree that the image being uploaded does NOT contain the following:

    Excessively gory images
    Graphic violence images
    Adult content
    Gratuitous gore
    Hateful imagery
    Political or confrontational imagery
    Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
    Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.

Video

PCB

You can set the PCB in tofix.cc

1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms

ANSI Plate

ANSI PC plate

ANSI Alu plate

ANSI Carbon Fiber plate

layout Support

Pictures

Dimension

Holy80 Kit with hotswap PCB | KBDfans Mechanical Keyboards Store